The role of efficient and clean incinerator for domestic waste

Domestic waste low-temperature magnetized cracking treatment equipment: a equipment that can reduce and harmless treatment of domestic waste, the equipment operates through the heat generated by the magnetic core component to remove the water of organic waste after cracking carbonization treatment, only producing a small amount of ash powder. The low temperature cracking equipment uses the working principle of cracking reactor for reference, and improves it to crack waste under medium and low temperature conditions. Although high temperature cracking can obtain more gas, its equipment investment and operating cost will increase greatly with the increase of temperature. Under the conditions of low temperature and low speed heating, organic molecules have enough time to decompose at their weak contacts and recombine into thermally stable solids, and it is difficult to decompose further, and the solid yield increases. Low temperature cracking equipment through the low temperature cracking of waste, in the realization of garbage harmless, reduction at the same time, you can also get cracked carbon fuel, and then through the magnetic core components to supply the right amount of air, so that cracked carbon combustion, the heat generated to supply garbage cracking, high thermal efficiency. The technology is through the special arrangement of the magnetic core components, so that the oxygen atoms of the inlet equipment are more active, and the carbon atoms have a more intimate combination, so as to accelerate the carbonization speed of the waste, and improve the carbonization temperature, and use the calorific value of the waste to achieve waste reduction treatment.

Working principle

The waste in the equipment successively through drying, pyrolysis, carbonization and burning four continuous processes, resulting in a small amount of ash and slag discharged outside the equipment. In order to control the generation of dioxins, ordinary incineration equipment requires that the temperature of the incineration gas must reach more than 850 degrees Celsius, and the residence time must reach more than 2S. Low-temperature pyrolysis incineration equipment is different from the working principle of ordinary incineration equipment, pyrolysis and carbonization are carried out in a state of low oxygen, and the generation of dioxins is produced from the source, and the formation of dioxins is controlled without relying on flue gas temperature and residence time. There are four basic conditions for the formation of dioxins: chlorine, oxygen, temperature and catalyst. In principle, the low-temperature cracking equipment controls the factors of dioxin production: waste in the cracking stage and carbonization stage is always in a state of hypoxia (reduction atmosphere), only oxidizing atoms are prefered to combine with C and H, Cu, AL, Fe, etc., are not easy to be oxidized, and the formation of dioxins requires heavy metal catalysts such as copper compounds, thus weakening the dioxin generation environment.

Scope of application

It is widely used in urban small domestic waste treatment plants, rural domestic waste treatment stations, industrial waste treatment stations, etc.