The Human Cremation Incinerator is a precision-engineered system designed for dignified, efficient, and environmentally compliant cremation services. Used in funeral homes, hospitals, government facilities, and disaster response units, this advanced incinerator ensures complete combustion with minimal emissions, adhering to international environmental and ethical standards.
✔ High-Efficiency Combustion – Dual-chamber design (850°C–1200°C)
✔ Eco-Friendly Operation – Meets EU 2010/75/EU, EPA, and WHO guidelines
✔ Automated Control System – Touchscreen PLC with real-time monitoring
✔ Dignified Process – Optimized for respectful human remains disposal
✔ Customizable Capacity – 50kg to 300kg per cycle (single/multi-body options)
|
Parameter |
Specification |
|
Capacity |
50–300 kg (adjustable) |
|
Primary Chamber |
850°C–1000°C |
|
Secondary Chamber |
1000°C–1200°C (afterburner) |
|
Fuel Type |
Natural Gas / LPG / Diesel |
|
Fuel Consumption |
15–30 m³/hr (natural gas) |
|
Combustion Time |
60–120 minutes (depending on load) |
|
Ash Residue |
2.5–3.5% of body weight |
|
Emission Control |
Wet scrubber + HEPA filter (PM <30mg/Nm³) |
|
Control System |
Digital PLC with temperature tracking |
|
Loading System |
Roller tray / automated conveyor (optional) |
|
Dimensions (L×W×H) |
2500mm × 1500mm × 2000mm |
|
Weight |
~2000 kg |
● Primary Chamber: Preheats and decomposes remains at 850°C+
● Secondary Chamber: Afterburns gases at 1100°C+ to eliminate pollutants
● Optional Tertiary Chamber: Catalytic converter for dioxin/furan removal
● Wet Scrubber: Reduces acid gases (HCl, SO₂)
● Cyclone Filter: Captures particulate matter
● Activated Carbon: Absorbs mercury & odors
● Touchscreen HMI for:
o Temperature profiling
o Fuel efficiency optimization
o Safety interlock monitoring
● Remote Diagnostics: 4G/WiFi-enabled for maintenance alerts
✔ Negative Pressure System – Prevents smoke leakage
✔ Flame Failure Protection – Auto-shutdown if flame extinguishes
✔ Emergency Cooling – Water quench system (optional)
1. System Calibration – Verify temperature sensors & airflow
2. Fuel Supply Check – Ensure adequate gas/diesel levels
3. Loading Preparation – Align tray mechanism
1. Loading – Remains placed on ceramic tray (manual/automated)
2. Primary Combustion – 60–90 min at 850°C–950°C
3. Secondary Combustion – 30–45 min at 1100°C–1200°C
4. Cooling & Ash Collection – 30 min cooling before retrieval
● Bone Fragment Processing – Optional cremulator for fine ash
● Emission Reporting – Automated logs for regulatory compliance
● Meets EU IED, EPA 40 CFR Part 60, and China GB13801
● Near-zero visible emissions with scrubber system
● 40% lower fuel consumption vs. older models
● Automated controls reduce labor costs
● Gentle loading systems for respectful processing
● Isolated combustion to prevent cross-contamination
● Daily high-volume cremations
● Pet cremation compatibility (with tray adjustments)
● Disaster victim identification (DVI) processing
● Prison/hospital remains disposal
● Mass casualty incidents
● Biohazard containment (e.g., Ebola outbreaks)
● Foundation: 200mm reinforced concrete
● Ventilation: Dedicated exhaust chimney (6–8m height)
● Utilities:
◎ Natural gas pipeline / diesel storage
◎ 380V 3-phase power (10kW)
● Daily: Ash removal, nozzle inspection
● Weekly: Scrubber water pH testing
● Annual: Refractory lining replacement
● Location: Berlin, Germany
● Challenge: Replace outdated, non-compliant units
● Solution: Installed 3 x 200kg capacity incinerators
● Results:
◎ 30% faster cremation cycles
◎ 100% compliance with EU 2010/75/EU
◎ ROI achieved in 18 months via fuel savings
● Multi-body systems (Simultaneous cremations)
● Mobile trailer-mounted units
● Energy recovery (Steam generation for facility heating)
The Human Cremation Incinerator sets the industry standard for dignified, efficient, and eco-conscious remains processing. Its modular design, regulatory compliance, and advanced automation make it the preferred choice for:
● Commercial crematoriums
● Government emergency response
● Hospital & research facilities
Available in three capacity tiers:
● Compact (50kg) – For infants/pets
● Standard (150kg) – Mainstream funeral homes
● High-Capacity (300kg) – Disaster response
Address
Qiqiao Town Economic Development Zone, Botou City, Hebei Province, China
Tel
